A Think Again Media Group publication
Gun Debunk

What did Gyrojet handguns fire?

Gyrojet rockets: an experimental handgun and a signaling legacy

By Phil Springer, Editor · Published · Gun Debunk

Gyrojet rockets: an experimental handgun and a signaling legacy

Gyrojet rockets continued accelerating after leaving their launcher. The system placed propellant within a small rocket projectile, rather than relying entirely on a charge that expanded behind a conventional bullet inside a barrel. MB Associates developed pistols and carbines around that principle during the 1960s. The firearms remained commercially marginal, but the related miniature-rocket technology also found a role in military distress signals intended to rise above dense foliage.

The best-known handgun used 13 mm Gyrojet rockets. Its hollow steel rocket body carried the propellant and a primer. Angled exhaust openings made the projectile rotate, supplying spin without spiral grooves in the launching tube. The launcher therefore differed from a conventional rifled handgun in both propulsion and stabilization. A rocket's motor could continue contributing energy beyond the muzzle, with maximum velocity reached only after the fuel had finished burning.

That distribution of acceleration was one of the design's most unusual characteristics. A conventional firearm accelerates its bullet within the barrel. Gyrojet rockets moved relatively slowly through the launcher and reached maximum kinetic energy roughly 20 yards along their path. Accuracy was also a persistent limitation. The prospect of a lightweight launcher and low recoil did not overcome the practical shortcomings that limited acceptance of the system as a replacement for conventional firearms.

The pistol was approximately the size of a Colt M1911 and used a magazine housed in its grip. Carbines offered another expression of the same idea. A few hundred were produced in two models, including a Mark I Model B with a sporting-rifle-style stock. The system’s comparatively low internal pressures offered the prospect of a lighter, cheaper firearm, since the launcher did not have to contain conventional cartridge pressures. MB Associates nevertheless went out of business without fully developing the range of commercial ideas behind the project.

Arthur T. Biehl and Robert Mainhardt continued developing the concept through MB Associates. Their U.S. patent 3,412,641, granted on November 26, 1968, concerned a pistol for miniature ballistic rockets. The application had been filed on June 27, 1966. It identified an earlier 1965 patent by Matthew C. Hengel as a predecessor assigned to the same company. Development thus involved successive designs within the business, rather than a single mechanism frozen at the first demonstration.

The later pistol used a frame formed from two cast sections, with possible materials including plastic or white metal. A separate hard-metal barrel belonged to that construction. The rocket magazine remained within the handle, and the design incorporated a rear slide and a fixed firing pin. A mechanical restraint initially held the rocket while thrust developed. These features reflected an effort to make the launcher economical to manufacture while accommodating propulsion that resided within the moving projectile.

A different application arose from the problems of aircrew signaling in heavily forested terrain. Earlier pen-type distress flares reached about 200 to 250 feet. Over Vietnam, a dense jungle canopy could stand above their useful height. Adapting Gyrojet rockets to distress signaling offered a way to reach through foliage without greatly increasing the weight or size of the signaling equipment. The resulting Gyrojet flare system used the same broad propulsion idea for a purpose separate from the handgun's role.

The Personnel Distress Kit, Red, A/P25S-5A was issued to Air Force and Army aircrews around 1970. It also appeared under the earlier M-201 designation and was described as a foliage-penetrating signal kit. The equipment formed part of the Air Force SRU-21/P survival vest and the Army OV-1 aircraft survival vest. Its compact kit combined a launcher with a bandolier containing seven signals, linked together by a lanyard.

The signals combined a small solid-propellant rocket motor with a delayed illuminating payload. Their metal cases were colored red to correspond to the signal color. The rocket propulsion and light-producing stage had different functions: one carried the signal upward, while the other made it visible. The Army's 2004 description specified an illuminating period of about 9 seconds. This separation of propulsion from illumination gave the technology an application beyond accelerating a projectile toward a target.

MB Associates supplied the military signaling equipment for about a decade after adoption. A May 3, 1972, Army Natick Laboratories drawing for an individual survival vest listed the foliage-penetrating kit and named MB Associates as supplier. The Navy generally retained its earlier percussion-fired pen-type equipment instead of issuing the rocket kit. The later Army market survey came from the Field Support Command at Rock Island, Illinois, in August 2004. It described a black anodized-aluminum launcher and a molded bandolier. Surviving kits carry MBA manufacturing marks and dated lot numbers on the signals.

The Question

What kind of projectiles did Gyrojet handguns fire?

Show the answer

The Answer

Small rockets. Their propulsion continued after they left the barrel, with acceleration lasting as long as their fuel burned.

Send this question to a friend

Read next

By clicking “Send me the real story” you agree to Gun Debunk’s Terms of Use and Privacy Policy.